Sockets and pins to make Pro Micro/nice!nano, Frood and similar controllers removable
Very useful when fitting batteries underneath the controllers
Mill Max 315 low-profile sockets
- Precision single-row (SIP) sockets
- Just 2.8 mm tall – battery will usually not fit underneath the controller without a gap
- Accept pins 0.040-0.056 mm in diameter (if you want to save, diode leg cutoffs will work just fine)
- Pack contains 2x 12-pin sockets or 2x 12-pin sockets + 1x 5-pin socket (for Frood)
Medium-profile sockets
- Single-row (SIP) sockets
- 4.55 mm tall – thin batteries will fit underneath the controller when installed in the usual (upside down) orientation
- Accept pins 0.040-0.056 mm in diameter (if you want to save, diode leg cutoffs will work just fine)
- Pack contains 2x 12-pin sockets
High-profile sockets
- 5.7 mm tall – most typical batteries will fit easily underneath the controller
- Accept standard thick square header pins supplied with the controllers
- Pack contains 2x 12-pin sockets
Mill Max 3320 pins:
- Precision gold plated pins
- Length: 6.3 mm
- Diameter: 0.052 mm
- Pack contains 25 or 30 pins
Standard square header pins:
- Total length: 11.65 mm (3.1 mm + spacer + 6.1 mm)
- Spacer height: 2.45 mm (can be removed)
- Pack contains 2x 12-pin strips or 2x 12-pin + 1×5-pin strips
Reviews
There are no reviews yet.